difficulty to connections

Moderator: Germes

difficulty to connections

Postby picolo » 04 Dec 2017, 12:32

Hello everyone
really not very clear the documentation, I have a lot of difficulty to understand.
I often make electrical connections, but the documentation is not clear
I hope you can help me.
I bought this interface for my A6 4F MMI 3g Basic

https://car-solutions.com/en/video-inte ... th-pas.php

+ 12 / gnd power supply, ok, but the questions remain!
on the image that I present to you, all the questions are present in image.

1) cam rear , I installed it, I plugged it in before receiving the interface, this camera is powered by 12v as the vehicle goes into reverse.
question, plugged the connector "R-CAM"? or not ?

2) The interface wires, yellow, purple, gray and white, they plug or ?
what connection in the car ?

3) Cabling "CAN" ok, I use "HS" if no good..., "LS"
I do not cut the original wires, I connect them "green / brown (command) with green" and orange / brown (command) with green / brown

4) RGB-in connector, why ? necessary ? , wiring in the car ? or ?

the questions in pictures :
https://img15.hostingpics.net/pics/939454608.jpg

Thank you for you precious help
picolo
 
Posts: 11
Joined: 19 Sep 2017, 18:20
Location: FRANCE
Car: Audi A6 C6

Re: difficulty to connections

Postby Yuretz » 04 Dec 2017, 13:32

Hello.
You may power it up(ACC and GND wires) from the cigaretter lighter.

1. Rear view camera can be powered from the R-CAM socket of the video interface.

2. F-CAM-DET, SAFE wires are not used. MMI wire(picture attached) is used to switch video interface inputs with the OEM NAV button(on MMI controller). REAR wire should be connected to the reverse lamp +12V wire if CAN connection is not used.

3. Do not cut OEM wires. Just strip them off and connect CAN wires from the interface to them.

4. RGB socket is used to connect an aftermarket navigation box.
Attachments
Audi_MMI_wire2.png
User avatar
Yuretz
CarSolutions Team
 
Posts: 226
Joined: 07 Feb 2012, 16:53
Location: Ukraine
Location: Lviv/Ukraine
Car: Fast as the wind

Re: difficulty to connections

Postby picolo » 05 Dec 2017, 03:04

thank you, I must be able to properly wire the interface.
I have all the necessary information.
thank you very much

that's one of the reasons I chose carsolution.
his technical help and his forum
picolo
 
Posts: 11
Joined: 19 Sep 2017, 18:20
Location: FRANCE
Car: Audi A6 C6

Re: difficulty to connections

Postby Yuretz » 05 Dec 2017, 10:10

We are glad that we could help you and greatly appreciate your feedback.
User avatar
Yuretz
CarSolutions Team
 
Posts: 226
Joined: 07 Feb 2012, 16:53
Location: Ukraine
Location: Lviv/Ukraine
Car: Fast as the wind


Return to Video Interfaces for Audi

Who is online

Users browsing this forum: No registered users and 1 guest