Car Solutions Forums

Hello
I plan to use the Gvif interface in my ls 460 2009 GCC spec. without Hardsk to connect garmin gvn 54.
what is the proper way to connect them and what i need ?

Hello.
You will need the following:
1. GVIF video interface
- you should connect connect in-between the OEM navigation
2. Touch screen adapter - Protocol: Kenwood original.

You will find manuals on the products' pages.

If you have any questions, please, don't hesitate to ask.

Best regards,
Car Solutions Team

Hello
Do you have a diagram for connect them ?

parking assist or monitor connect to GVIF interface then connect garmin gvn 54 to GVIF and finally connect garmin to TSC-206IM

is this the way

Hello.

Here - on the page 3 you can find the approximate connection scheme. Instead of nav2nav - TSC-206im, instead of 9100- GVN54. GVIF interface is connected between te OEM navigation and monitor. To connect TSC-206IM you need to dismantle the monitor and cut OEM touch FFC. OEM touch FFC should be connected to the TSC-206IM, and wires from TSC-206IM should be connected to the navigation box.

Hi,
where i can find the OEM touch FFC in my ls 460 2009? is it behind the monitor or at parking assist?

if i use GVIF lite how i can connect it to ls 460 2009?

Also, For 2010 lexus cars how to and what i need to use touch screen to control the garmin if i use GVIF lite?

Hello!
You will find FFC when you disassemble the monitor.
GVIF lite doesn't suite for your case.

Hi
Can you explain more by picture
this my monitor https://app.box.com/s/2ys9mesjzlj1hm6obem8

Please, apply to the installation specialists to avoid damages.