Car Solutions Forums

Dear support,

I ordered GVIF for Range Rover few days ago. I received the package and before starting installation want to ask you about cables in attachment. Do I need to connect them anywhere?



Thanks and regards

Hello.
You need the fololwing wires: ACC, GND, REAR, CAN-H/L(to OEM button switch inputs) .

To which cables do I need to connect the grey, the green and the black wires?

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16
R | B | G| | | | | | | | Y | G | | B | L | P
B | B | Y| | | | | | | | G | | | B | |

B=Black
L=Blue
P=Purple
Y=Yellow
G=Green
R=RED

I connected the following wires but still nothing:

ACC - Red
CAN L - Green
CAN H - Yellow
GND - Black
??? - Grey

GVIF IN/OUT - Landrover Cable Out
Touch Navi - IR Sensor
Power/Can - Button

Any thoughts?

Hello.
Please provide the following information:
1. Car model and year;
2. Where have you connected the video interface. Behind the head unit or the navigation unit;
3. Is the red LED on;
4. What happens when you're pressing the mode button.