CS9100 for Toyota Touch&Go

Moderator: Germes

CS9100 for Toyota Touch&Go

Postby lzolka » 29 Jan 2014, 20:07

I installed successfully CS9100 Touch&Go set (Car Solution Edition) for several nav units (59026 Verso, 19006 Yaris).
On these units there is a MAP/nav button, the installed navigation is activated by double push of the Power button.
Now I tried to install the same set for Prius 57037 unit with JBL, it also has MAP/nav button.
Unfortunately the Power button doesn't activate the external unit screen.
How to fix it?

The next work will be a 2013 Rav4 with 53888 T&Go unit, but on this unit there is only a NAV button, not MAP/nav.
Will this set work with this unit?

Rav4.jpg
lzolka
 
Posts: 8
Joined: 09 Dec 2013, 14:28
Location: Magyarország
Car: Toyota Camry Hybrid

Re: CS9100 for Toyota Touch&Go

Postby Chortenia » 30 Jan 2014, 13:16

Hello.
Look on the reverse side of Universal Touch Adapter, there is a sticker with the firmware version and description of the witches. For RAV4 set the position ON (down) - the OEM NAV button will be activated. For Prius try it in both positions.

Please, tell us the firmware version.
Best regards,
Car Solutions Team
User avatar
Chortenia
CarSolutions Team
 
Posts: 510
Joined: 17 Sep 2010, 17:06
Location: Lviv, Ukraine
Location: Ukraine
Car: Chery Kimo

Re: CS9100 for Toyota Touch&Go

Postby lzolka » 30 Jan 2014, 19:48

Thanks for quick reply.

Firmware_v1.5
Which DIP do you suggest?
I tried DIP2 ON/OFF but nothing change with Prius.
lzolka
 
Posts: 8
Joined: 09 Dec 2013, 14:28
Location: Magyarország
Car: Toyota Camry Hybrid

Re: CS9100 for Toyota Touch&Go

Postby lzolka » 31 Jan 2014, 00:08

OK, Prius now works, DIP2 ON, MAP/nav button activate CS9100.
Not problem but interest that with this unit DIP1 is not affect, when car starting, CS screen come up, independent from ON or OFF state.

Thanks.
lzolka
 
Posts: 8
Joined: 09 Dec 2013, 14:28
Location: Magyarország
Car: Toyota Camry Hybrid

Re: CS9100 for Toyota Touch&Go

Postby Chortenia » 31 Jan 2014, 11:05

toggle #1 - Autostart (ON-Activated; OFF-deactivated)
toggle #2 - Type of head unit(ON-GT86,RAV4 maybe some others(Nav button and other functions works as it should); OFF-Yaris,Venza some others)
toggle #5 - Protocol type(ON-Kenwood; OFF-Garmin GVN53)

Not problem but interest that with this unit DIP1 is not affect, when car starting, CS screen come up, independent from ON or OFF state.

Turn the power off, set the DIP1 in OFF position and apply power. Does our box still start?
Best regards,
Car Solutions Team
User avatar
Chortenia
CarSolutions Team
 
Posts: 510
Joined: 17 Sep 2010, 17:06
Location: Lviv, Ukraine
Location: Ukraine
Car: Chery Kimo

Re: CS9100 for Toyota Touch&Go

Postby lzolka » 31 Jan 2014, 18:54

With Prius unit always start with CS screen, in toggle #1 ON or OFF state both, after power off also.
With other units this autostart enable/disable works correctly by toggle #1.
This is a minor problem, the most important that the activation works by MAP/nav button.

Thanks for answers
lzolka
 
Posts: 8
Joined: 09 Dec 2013, 14:28
Location: Magyarország
Car: Toyota Camry Hybrid

Re: CS9100 for Toyota Touch&Go

Postby Chortenia » 03 Feb 2014, 15:57

Disable navigation autostart form the HU settings. Navi/MAP button serves for switching only in the cars like RAV4,GT86 and some others.
Best regards,
Car Solutions Team
User avatar
Chortenia
CarSolutions Team
 
Posts: 510
Joined: 17 Sep 2010, 17:06
Location: Lviv, Ukraine
Location: Ukraine
Car: Chery Kimo

Re: CS9100 for Toyota Touch&Go

Postby jhaynes » 24 Nov 2014, 10:29

Actually, I bought a Toyota car weeks ago, and I definitely love it! With a site I came across, I was able to determine what the very best deal was on my new Toyota before I went to buy it. Surely, I will also install Touch&Go set for my new vehicle. Thank heaven I read this thread! :)
User avatar
jhaynes
 
Posts: 1
Joined: 24 Nov 2014, 09:50
Location: usa
Car: toyota


Return to CS9100 Navigation Box

Who is online

Users browsing this forum: No registered users and 1 guest

cron