Car Solutions Forums

Hi!!
I already have the drivers wince 6.
How can I install drivers in my CS9200R?? Have you got any manual for this???

Thanks

Hello!
What drivers exactly do you want to install?

Chortenia wrote:Hello!
What drivers exactly do you want to install?

I want to install drivers wince 6 for http://car-solutions.com/en/usb-touch-s ... roller.php
I think to have saw a manual in your web but I don´t find it.

Drivers for touch screen controller are already installed in CS9200.

Ok!!!
Thanks

Welcome!

If you have any other questions don't hesitate to ask.

Best regards,
Car Solutions Team

Hi!!!
I have installed it but I have a some problems!!!
I don´t know where I have to connect http://car-solutions.com/en/usb-touch-s ... roller.php
I connected the touch screen video interface for Range Rover Evoque but it does not work. Can you tell me how I have to connect it to my original touch screen work????? Any scheme or manual? I don´t need this http://car-solutions.com/en/accessories ... een-panels because my original scrren is touch (Range Rover Evoque touch screen 8´´)

I have three problems more:
- Where is the "MUTE" en my original touch screen??? I don´t know to connect it and while playing the GPS module (small speaker) also sounds original radio car speakers!!!! I don´t know how connect it!!!!
- I have a problem with keyboard. It can not be viewed on the screen completely, it is cut! I put a picture. I do not know how I can configure it! Also it always appears in the same place and not let me see the screen where all the folders

- When I put internet it doesn´t work!!!! It shows me the following message (look the photo). What happend????


Thanks

Hello!

I don´t know where I have to connect http://car-solutions.com/en/usb-touch-s ... roller.php
I connected the touch screen video interface for Range Rover Evoque but it does not work. Can you tell me how I have to connect it to my original touch screen work????? Any scheme or manual? I don´t need this http://car-solutions.com/en/accessories ... een-panels because my original scrren is touch (Range Rover Evoque touch screen 8´´)

Select USB Touch Eeti protocol in CS9200 settings (panel), it's located almost in the end of the list. Make calibration after restart.

I have three problems more:
- Where is the "MUTE" en my original touch screen??? I don´t know to connect it and while playing the GPS module (small speaker) also sounds original radio car speakers!!!! I don´t know how connect it!!!!

Connect white wire on the power cable to Mute wire of your head unit.

I have a problem with keyboard. It can not be viewed on the screen completely, it is cut! I put a picture. I do not know how I can configure it! Also it always appears in the same place and not let me see the screen where all the

You can move the keyboard.

When I put internet it doesn´t work!!!! It shows me the following message (look the photo). What happend????

The manufacturer does not install Internet Explorer on these navigation boxes. You can use any other browser, e.g. Opera. Rename Opera_Mini.exe into adzoommt-armv4i.exe

Best regards,
Car Solutions Team

Chortenia wrote:Hello!

I don´t know where I have to connect http://car-solutions.com/en/usb-touch-s ... roller.php
I connected the touch screen video interface for Range Rover Evoque but it does not work. Can you tell me how I have to connect it to my original touch screen work????? Any scheme or manual? I don´t need this http://car-solutions.com/en/accessories ... een-panels because my original scrren is touch (Range Rover Evoque touch screen 8´´)

S
elect USB Touch Eeti protocol in CS9200 settings (panel), it's located almost in the end of the list. Make calibration after restart.


Best regards,
Car Solutions Team

But I haven´t connected http://car-solutions.com/en/usb-touch-s ... roller.php because I don´t know where connect it. I have connected directly to the original touch screen to car video interface for Range Rover Evoque (http://car-solutions.com/es/car-video-i ... evoque.php) and car video interface for Range Rover Evoque connect directly to CS9200, I have not used the USB touch screen controller.
I have connected it this way: Original touch screen --------¬ Car Video Interface for Range Rover Evoque-----------¬ CS9200R. I haven´t used the USB Touch Screen Controller.
Please, can you send me any scheme or manual to connect it????? I think my connection is bad.

Thanks

Please refer to the following manual. Look at the page 3 where touch cable goes from navigation. So here put USB touch screen controller instead of touch cable. The connector's step does not coincide with the socket on the video interface so you need to remake it by yourself.

Ok!!!
Thank you very much.
I will try it.

Kind regards

Hi!!!
I have connected the USB touch screen controller following the manual page 3 but the CS9200 does not recognize the USB touch screen controller.



What could have happened?
What would have to do now???

Could you send me more photos of the installation??
https://picasaweb.google.com/1090933727 ... 3000120274

I have problems with the USB touch screen controller and with the sound (original radio always sounds while the CS9200 with GPS function).

Hi.
Update the firmware. Here is the manual

I have to put into SD: SD CARD 1 + FW_CS9200_v0.87_Car Solutions.Bin or only archives of SD CARD 1
I have copied all files (only files, no folder) from SD 1 folder to SD and I have made step 2 but it doesn't load.