Page 1 of 1

Andromeda stuck on Android Logo

PostPosted: 14 Nov 2015, 16:39
by sanitariu
I bought navi system for toyota touch and go.
From 2 days my navi stays on adroid logo i tried
putting update.zip on SD card and using the white reset+power but it is the same.
What to do now ?
Anyone have similar issues ?

Re: Andromeda stuck on Android Logo

PostPosted: 16 Nov 2015, 13:23
by Chortenia
Hello.
Unfortunately, in case Andromeda is not booting after SD card update you need to update it via USB first.
To update via USB you will need: FWDN - and update files.

Here's a manual for FWDN and Drivers-

After you have added "lk-0715-axp-skl.rom" and "m805_892x-20131031-skl-adctp-800X480-samsung.img" in FWDN - create "NAND data.fai" file by pressing NADA DATA button. After you have created it - you will have 3 files in the list. Now you can press "Start" button.

After USB update you will need to update via SD card once again.

Re: Andromeda stuck on Android Logo

PostPosted: 16 Nov 2015, 16:48
by Chortenia
NOTE!
Before updating you need to disassemble Andromeda and use mini-USB socket on it. Also, when you connect it via the mini-USB press the button on the other side of the blue PCB by long non-conductive object. See the image After that install drivers and run FWDN.

Re: Andromeda stuck on Android Logo

PostPosted: 16 Nov 2015, 20:06
by sanitariu
I did flash it but with m805_892x-20131031-skl-adctp-800X480-samsung.img.
My car display resolution is 320x something.
Now i see 5 pictures.
Can you make new image config for lower resolution.
Toyota Touch and GO - Pirus Plus Europe = Prius V America

Re: Andromeda stuck on Android Logo

PostPosted: 17 Nov 2015, 10:07
by Yuretz
Now update via SD card - https://copy.com/LlRuaXPkKP33MObd

Re: Andromeda stuck on Android Logo

PostPosted: 17 Apr 2017, 13:45
by sanitariu
Helllo,
it happened again.
Can i have the pictures with button explanations ?
Which is for what.
Link above not working.
Also my resolution is 320 something ...
Now update via SD card - https://copy.com/LlRuaXPkKP33MObd
This is not working too.
Please can i have them so i can restore my navi or tell me how to edit resolution.

Best Regards,
Todor

Re: Andromeda stuck on Android Logo

PostPosted: 18 Apr 2017, 08:40
by Yuretz
sanitariu wrote:Helllo,
it happened again.
Can i have the pictures with button explanations ?
Which is for what.
Link above not working.
Also my resolution is 320 something ...
Now update via SD card - https://copy.com/LlRuaXPkKP33MObd
This is not working too.
Please can i have them so i can restore my navi or tell me how to edit resolution.

Best Regards,
Todor


https://www.odrive.com/s/61f10c4d-8a85- ... 5-58f5a658 - 800x480
https://www.odrive.com/s/0705b49e-203d- ... d-58f5a665 - 480x234
Use upper button on the blue PCB https://www.odrive.com/s/0229a2f0-39f6- ... 2-58f5a67d or update it via menu .