CAN cables / colours Range Rover Sport

Car video interfaces, GVIF interfaces, video in motion adapters for Audi, BMW, Mercedes-Benz, Porsche, Lexus, Toyota and other car brands

Moderator: Germes

CAN cables / colours Range Rover Sport

Postby johnkoot » 23 Aug 2014, 14:44

Hi there,

I've ordered:
http://car-solutions.com/en/gvif-interf ... jaguar.php
and the:
http://car-solutions.com/en/gvif-land-rover-cable.php

In preperation of the installation in my land rover range rover sport 2006, i can not identify the can high and can low cables.

The manual says the HIGH cable is green/brown and the LOW cable is green.
CAN HIGH: I can't find the green/brown cable, it's not there!
CAN LOW: And i've up to 3 (!) green cables, so, which one do i need to cut !?

Please watch the photo, you can excatly see the colour of wires there are, can anyone tell me what wires to cut and connect to the two can-cables of the GVIF ?

Otherwise, if you can't, i would like to have the exact pinnumbers of the cars CAN Connection connector. What pinnumbers (car navigation connection) are the can high and can low connections?

Many thanks!
Greets John
The Netherlands
Attachments
wires navigation_small.jpg
photo of colours wiring to navigation
johnkoot
 
Posts: 1
Joined: 23 Aug 2014, 14:39
Location: Netherlands
Car: Range Rover Sport 06

Re: CAN cables / colours Range Rover Sport

Postby Chortenia » 26 Aug 2014, 15:28

Hello.

First of all we, unfortunately, don't have schematic diagram of this car and manufacturer can change wires color. The CAN wires should be twisted pair and I see a twisted pair of green and yellow wires on your picture. Please, measure the voltage on these wires relatively to the GND when ignition is on. If there is 2-5V, then these are CAN wires.

Best regards,
Car Solutions Team
Best regards,
Car Solutions Team
User avatar
Chortenia
CarSolutions Team
 
Posts: 510
Joined: 17 Sep 2010, 17:06
Location: Lviv, Ukraine
Location: Ukraine
Car: Chery Kimo


Return to Car Video Interfaces

Who is online

Users browsing this forum: No registered users and 2 guests

cron